<< 返回目录

LaserTurn 2and 5激光加工系统
产品描述技术参数外形尺寸订货信息

Design Features

  • High integration linear/rotary motion platform
  • Pneumatically actuated 3-jaw gripper or ER collet
  • Clear aperture for product feedthrough
  • Optional front and rear tooling platforms
  • Direct-drive linear and rotary motor technology
  • Configure for wet or dry cutting
  • High-speed rotary option for rotational speeds up to 2000 rpm

The LaserTurn® series of products are the first dedicated motion subsystems targeted directly at cylindrical laser processing applications. The integrated linear-rotary system combines automated material handling functionality and wet cutting operation with high performance direct-drive linear and rotary motion. The pneumatically-actuated 3-jaw gripper has a clear aperture for product feedthrough, and can be configured for O.D., I.D., or odd form gripping with various jaw geometries, while the ER collet supports tubing diameters from 0.5 mm to 30 mm.

Integral Tooling Platform

The LaserTurn® series can be equipped with front and rear tooling platforms that include tapped holes on four surfaces for various fixture mounting. The tooling platform is bolted directly to the base of the linear stage providing a stiff, common inertial frame of reference. Custom fixtures such as bushing alignment, part collection, or automated material advance assemblies can easily be attached. Metric or English-based hardware and hole patterns are available as are custom configurations with application specific features.

Automated Material Handling

The LaserTurn® is a complete motion and material handling subsystem. The system includes an automated, pneumatically activated 3-jaw gripper or ER collet for part holding. The 3-jaw gripper has a clear aperture for product feedthrough and can be configured for O.D., I.D., or odd form gripping with various jaw geometries. The ER collet chuck also has a clear aperture for product feedthrough and can support tubing diameters from 0.5 mm (0.020 inch) to 30 mm (1.18 inch).

Direct-Drive Technology

The LaserTurn® series utilizes direct-drive noncontact motor and encoder technology for both the linear and rotary axes. Direct-drive motors exhibit significantly higher throughput and maintenance-free operation when compared to gear and screw-driven technology. Linear and rotary encoders coupled directly to the load have the highest level of system accuracy and repeatability over the operating lifetime of the stage.

Scalable Product Solutions

Two platforms, the LaserTurn® 2 and the LaserTurn® 5, are available to provide support for different price and performance requirements. Each product features the automated material handling capabilities and modular tooling platforms. The LaserTurn® 2 has a smaller overall footprint and reduced load carrying capability while providing similar accuracy and repeatability to the larger LaserTurn® 5.

The LaserTurn 5’s deeper cross section and larger bearings provide higher throughput and dynamic tracking accuracy for a given load when compared to the LaserTurn 2.

Advanced Control Architecture

The LaserTurn is available with Aerotech’s advanced A3200 control system. The A3200 is a 100% digital system with high performance FireWire® networked drives. With this fully digital architecture it is possible to optimize the current, velocity, and position servo loops for maximum performance. Advanced trajectory generation capabilities such as multi-block look ahead minimize geometry errors in tight profiles by transparently regulating cutting speed. Aerotech’s Position Synchronized Laser Firing Output (PSO) functionality automatically adjusts the laser pulse frequency to match the current cutting speed to maintain optimal laser power coupling.

urrent cutting speed to maintain optimal laser power coupling.

LaserTurn2and5
 

Normalized Parts Per Hour (With Equivalent Tolerance)

LaserTurn2and5Normalized Parts Per Hour

Part Accuracy Versus Cycle Time Comparison

LaserTurn2and5Part Accuracy

标准的或定制的,我们已经有了你。